| OVERALL DIAMETER | 1.940 INCHES NOMINAL |
| EXTENDED LENGTH | 13.000 INCHES NOMINAL |
| COMPRESSED LENGTH | 11.500 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 1.840 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 356.0 BODY |
| FIRST PISTON ROD END STYLE | BEARING TYPE |
| STRAIGHT BORE INSIDE DIAMETER | 1.188 INCHES MINIMUM AND |
| 1.520 INCHES MAXIMUM |
| MOUNTING TYPE AND LOCATION | TONGUE CYLINDER HEAD END |
| MOUNTING PROVISION | PIN |
| MOUNTING FACILITY DIAMETER | 0.2495 INCHES MINIMUM |
| 0.2500 INCHES MAXIMUM |
| MOUNTING FACILITY LENGTH | 1.440 INCHES NOMINAL |
| PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| 1 PISTON ROD END |
| PORT STYLE | GASKET SEAL |
| PORT THREAD SERIES DESIGNATOR | UNF |
| PORT THREAD DIAMETER | 0.438 INCHES NOMINAL |
| PORT THREAD QUANTITY PER INCH | 20 |
| PORT THREAD CLASS | 3B |
| SEAT ANGLE IN DEG | 45.0 |
| TEMP RATING | -65.0 DEG FAHRENHEIT |
| 275.0 DEG FAHRENHEIT |
| BLEEDING FEATURE QUANTITY | 1 |
| RESERVOIR TYPE | REMOTE |
| ACTUATION METHOD | DIRECT |
| TEST DATA DOCUMENT | 77272-114HS105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS105 FSCM 77272 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 77272 |
| MFR SOURCE CONTROLLING REFERENCE | 114HS105-6 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 99643 |
| DESIGN CONTROL REFERENCE | 18050-10 |