| BODY MATERIAL | ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T4 |
| BORE DIAMETER | 1.260 INCHES NOMINAL |
| COMPRESSED LENGTH | 11.760 INCHES MINIMUM AND 11.900 INCHES MAXIMUM |
| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| EXTENDED LENGTH | 12.660 INCHES MINIMUM AND 12.800 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 1.250 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 3A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 0.4375 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| OVERALL HEIGHT | 3.210 INCHES MINIMUM AND 3.270 INCHES MAXIMUM |
| OVERALL WIDTH | 2.000 INCHES NOMINAL |
| MOUNTING TYPE AND LOCATION | BOSS CYLINDER HEAD END |
| PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT STYLE | GASKET SEAL SINGLE PORT |
| PORT THREAD CLASS | 3B ALL PORTS |
| PORT THREAD CLASS | 3B SINGLE PORT |
| PORT THREAD DIAMETER | 0.438 INCHES NOMINAL SINGLE PORT |
| PORT THREAD DIAMETER | 0.500 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 20 ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| PORT THREAD SERIES DESIGNATOR | UNF ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| PRESSURE RATING | 1500.0 POUNDS PER SQUARE INCH NOMINAL |
| SEAT ANGLE IN DEG | 45.0 ALL PORTS |
| SEAT ANGLE IN DEG | 40.0 SINGLE PORT |
| TEMP RATING | -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT |
| TEST DATA DOCUMENT | 97499-570-076-002 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |