| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION TYPE | OUTLET |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-4 |
| CONNECTION QUANTITY | 1 |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 94.0 OR 114.0 |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 AT MINUS 65 DEG F TO PLUS 225 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.870 BY1.870 IN. C TO C |
| MOUNTING GOVERNMENT STANDARD | AND 10260 |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING HOLE DIAMETER | 0.422 INCHES NOMINAL |
| MOUNTING TYPE | FLANGE |
| PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE PITCH | 32/64 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 1.125 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND 0.409 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.346 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 9/16-18 |
| TORQUE LOAD RATING | 1800.0 INCH-POUNDS |