|
|
|
National Stock Number:
1650-00-022-5451
Federal Supply Class:
1650
National Item Identification Number:
000225451
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21-11735 | 05228 | PTI TECHNOLOGIES INC. | | 21-11735 | 81873 | WOODWARD HRT INC | | 21-11735 | 96124 | TRANSDIGM INC | | 69A27803-105 | 98747 | OGDEN AIR LOGISTICS CENTER | | 7577737 | 05228 | PTI TECHNOLOGIES INC. | | AC-900F625 | 18350 | PALL AEROPOWER CORPORATION | | AC-900F625 | 1EP30 | PALL AEROPOWER CORPORATION | | AC900F625 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 4.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.960 INCHES MAXIMUM | | BODY OVERALL LENGTH | 2.375 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | III FSC APPLICATION DATA | ACFT HYDRAULIC SYSTEM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
|
|