| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING LENGTH BETWEEN FERRULES | 18.500 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.273 INCHES NOMINAL |
| CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 3 BOTH ENDS |
| THREAD LENGTH | 1.500 INCHES NOMINAL BOTH ENDS |
| END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| SHANK OUTSIDE DIAMETER | 0.406 INCHES NOMINAL BOTH ENDS |
| SHOULDER OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 19.469 INCHES NOMINAL |
| CORE DIAMETER | 0.187 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED FIRST END |
| THREADED MALE SECOND END |
| TIP LENGTH | 0.438 INCHES NOMINAL FIRST END |
| 0.469 INCHES NOMINAL SECOND END |
| CROSS SECTION SIZE AND LOCATION | 0.187 INCHES NOMINAL DIAMETER FIRST END |
| 0.250 INCHES NOMINAL DIAMETER SECOND END |
| TONGUE LENGTH | 0.469 INCHES NOMINAL SECOND END |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE FIRST END |
| SPLINE QUANTITY | 12 FIRST END |
| SPLINE MAJOR DIAMETER | 0.297 INCHES NOMINAL FIRST END |
| SPLINE MINOR DIAMETER | 0.235 INCHES NOMINAL FIRST END |
| SPLINE LENGTH | 0.250 INCHES NOMINAL FIRST END |
| PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| CORE TIP THREAD CLASS | 2 SECOND END |
| CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CORE TIP THREAD LENGTH | 0.750 INCHES NOMINAL SECOND END |
| CORE REMOVABILITY | REMOVABLE |
| OVERALL LENGTH | 19.569 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 2.0 DEG FT-LB IN. TORSIONAL DEFLECTION RATING FOR WINDING,4.0 DEG FT-LB IN. TORSIONAL RATING FOR UNWINDING |
| MINIMUM OPERATING RADIUS | 3.500 INCHES |
| SPECIAL FEATURES | 60 IN.-LBS TORSION STRENGTH IN UNWINDING DIRECTION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 0KZS2 |
| DESIGN CONTROL REFERENCE | LA2095B18-5 |