| VOLTAGE IN VOLTS | 24.0 |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.688 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.816 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES | UNC |
| UNTHREADED PORTION LENGTH | 1.132 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 4.000 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.240 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.382 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.514 INCHES MINIMUM AND 0.524 INCHES MAXIMUM |
| FURNISHED ITEMS | COOLING FAN AND LOCKWASHER AND NUT AND WOODRUFF KEY |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | NPAC |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| RECTIFIER LOCATION | INTEGRAL |
| SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |