| OVERALL LENGTH | 3.319 INCHES |
| OVERALL WIDTH | 1.250 INCHES |
| OVERALL HEIGHT | 1.250 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.625 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.000 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | NATIONAL STANDARD |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.160 SINGLE INPUT |
| CURRENT RATING METHOD | NO LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO LINE SINGLE INPUT |
| TORQUE RATING AND TYPE | 62.0 INCH-OUNCES RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND |
| 85.0 OPERATING DEG CELSIUS |
| COOLING METHOD | OIL |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 66.000 LOW REVOLUTIONS PER MINUTE AND |
| 83.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.2495 INCHES NOMINAL SINGLE END |