| ATTACHMENT METHOD | MOUNTING HOLE |
| BACKLASH DESIGNATION | GRADE D |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.18725 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.5000 INCHES FIRST END |
| END NOMINAL LENGTH | 0.1875 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.122 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.8750 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.0625 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.2500 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.3125 INCHES |
| PITCH DIAMETER | 2.2812 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | TWO 0.109 IN. DIA HOLES 0.109 IN.DEEP 180 DEGREES APART,0.375 IN. BOLT CIRCLES DIAMETER |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 146 |
| TOOTH FORM | STANDARD |