|
|
|
National Stock Number:
3040-00-003-8902
Federal Supply Class:
3040
National Item Identification Number:
000038902
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5100153 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6245 INCHES NOMINAL | | FIRST END SLOT DEPTH | 0.230 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.562 INCHES NOMINAL | | FIRST END STYLE | SLOTTED | | LARGEST STEP DIAMETER | 0.7495 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | SECOND END DIAMETER | 0.7495 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.343 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | 0.188 IN. DIA HOLE 1.312 IN. FROM 2ND END; 0.188 IN. HOLE 0.926 IN. FROM 1ST END; HOLES HAVE 1.262 C TO C DISTANCE,90.0 DEG APART | | STEP QUANTITY | 2 |
|
|