|
|
|
National Stock Number:
3040-00-006-7482
Federal Supply Class:
3040
National Item Identification Number:
000067482
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 387708-1 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | C12225-3 | 81755 | LOCKHEED MARTIN CORPORATION | | CS3 | 29440 | W. M. BERG INC |
|
Techincal Specification:
| BORE DIAMETER | 0.1248 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.165 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.313 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 303-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | NOMINAL THREAD SIZE AND LOCATION | 0.086 INCHES SINGLE HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC | | SECURING HOLE QUANTITY | 1 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SMALL END DIAMETER | 0.188 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.180 INCHES NOMINAL |
|
|