|
|
|
National Stock Number:
3040-00-014-1842
Federal Supply Class:
3040
National Item Identification Number:
000141842
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1096 | 16552 | OVERTON GEAR CALIFORNIA SUB OF OVERTON GEAR AND TOOL CORP | | 1096 | 18131 | AMERICAN PRECISION GEAR COMPANY | | 1096 | 50582 | OVERTON CHICAGO GEAR CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5350 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.875 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6320 INCHES MINIMUM AND 0.6380 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.8616 INCHES MINIMUM AND 0.8666 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643,17-4 PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.600 INCHES NOMINAL | | SECOND END DIAMETER | 0.8616 INCHES MINIMUM AND 0.8666 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 1.1250 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8616 INCHES MINIMUM AND 0.8666 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 16 | | STEP QUANTITY | 3 |
|
|