|
|
|
National Stock Number:
3040-00-015-3968
Federal Supply Class:
3040
National Item Identification Number:
000153968
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 245136-001 | 65092 | SOLARTRON ELECTRONICS INC WESTON INSTRUMENTS DIV |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AMDL AND AMFZ AND CSPY | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0306 INCHES MINIMUM AND 0.0308 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.0798 INCHES MINIMUM AND 0.0802 INCHES MAXIMUM | | OVERALL LENGTH | 2.483 INCHES MINIMUM AND 2.487 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL303S,COND ACF FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.0317 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | BOTH ENDS CHAMFERED 0.010 IN. BY 45 DEG PORM 5 DEG | | STEP QUANTITY | 5 | | SUPPLEMENTARY FEATURES | 200-240 BRINELL HARDNESS |
|
|