|
|
|
National Stock Number:
3040-00-018-2697
Federal Supply Class:
3040
National Item Identification Number:
000182697
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| Y2VK10X1B379C0M | 30760 | INGERSOLL RAND CO | | Y2VK10X6 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | Y2VK10X6 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | Y2VK10X6-379 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | Y2VK10X6-379 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL KEYWAY LENGTH | 0.625 INCHES NOMINAL | | FIRST END DIAMETER | 1.3120 INCHES NOMINAL | | FIRST END KEYWAY DEPTH | 0.094 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.1880 INCHES NOMINAL | | FIRST END STYLE | FLAT KEYWAY | | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 7.000 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.062 INCHES NOMINAL | | SECOND END DIAMETER | 1.5000 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DEPTH | 1.5000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | STEP QUANTITY | 2 |
|
|