|
|
|
National Stock Number:
3040-00-021-1835
Federal Supply Class:
3040
National Item Identification Number:
000211835
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| L1-6705 | 46717 | PETTIBONE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1880 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 6.437 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1141 | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | SECOND END SLOT DEPTH | 1.000 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.406 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED HOLE AND SLOTTED | | SECOND END HOLE DEPTH | 0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL | | STEP QUANTITY | 2 |
|
|