3040-00-024-5960, SHAFT,SHOULDERED

2915-00-024-5959 LEVER ASSEMBLY,GOVERNOR

National Stock Number:
3040-00-024-5960

Federal Supply Class:
3040

National Item Identification Number:
000245960

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

192422

06848

HONEYWELL INTERNATIONAL INC

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DISTANCE FROM HOLE CENTER TO END	0.208 INCHES NOMINAL
FIRST END EXTERNAL THREAD LENGTH	0.594 INCHES NOMINAL
FIRST END DIAMETER	0.3059 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
FIRST END HOLE DIAMETER	0.0740 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM
FIRST END STYLE	CROSS DRILLED AND EXTERNALLY THREADED
LARGEST STEP DIAMETER	0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM
OVERALL LENGTH	8.4060 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-5610 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL CORROSION RESISTING
SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS	0.562 INCHES NOMINAL
SECOND END GROOVE DIAMETER	0.2810 INCHES MINIMUM AND 0.2850 INCHES MAXIMUM
SECOND END DIAMETER	0.3744 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM
SECOND END SPLINE LENGTH	1.062 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER	0.3740 INCHES NOMINAL
SECOND END SPLINE MINOR DIAMETER	0.3500 INCHES NOMINAL
SECOND END SPLINE QUANTITY	36
SECOND END STYLE	TWO CIRCULAR GROOVES AND SPLINED (STRAIGHT_)
STEP QUANTITY	5
SPECIAL FEATURES	SPLINED SHOULDER 0.250 IN. W,1.688 IN. FROM THREADED END
SURFACE FINISH	40.0 MICROINCHES

Click here to Register for Free 30-day Trial