|
|
|
National Stock Number:
3040-01-361-5910
Federal Supply Class:
3040
National Item Identification Number:
013615910
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 225522-0-01 | 95402 | ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC | | 225522-0-01Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 225522-0-01SS | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 225522001Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 225522001 | 1Q8T8 | ALJERS LLC | | 3254-6 ITEM 42 | 95402 | ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC | | 3254-6 ITEM 42Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 3254-6 ITEM 42SS | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | ZZZY | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.9060 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.562 INCHES NOMINAL | | OVERALL LENGTH | 28.312 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ITEMS THAT SUPPORT A LEVEL I OR SUBSAFE CRITICAL SYSTEM/COMPONENT THAT HAS UNDERGONE QUALITY ASSURANCE DURING THE ACQUISITION PROCESS AND REQUIRES OBJECTIVE QUALITY EVIDENCE (OQE) TRACEABLE TO PERMANENT MARKING ON THE MATERIAL | | SECOND END DIAMETER | 1.3760 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.4370 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 29 |
|
|