|
|
|
National Stock Number:
3040-01-368-7602
Federal Supply Class:
3040
National Item Identification Number:
013687602
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5497642 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5497642-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5497642-1 | 70236 | TACTAIR FLUID CONTROLS INC | | 5497642-1 | 99215 | KAISER FLUID TECHNOLOGIES INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | OVERALL LENGTH | 1.780 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2145 INCHES MINIMUM AND 0.2150 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.130 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0943 INCHES MINIMUM AND 0.0946 INCHES MAXIMUM | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 3 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|