|
|
|
National Stock Number:
3040-01-369-9147
Federal Supply Class:
3040
National Item Identification Number:
013699147
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1410M32 | 66464 | GENERAL ELECTRIC CO | | 1410M32P11 | 66464 | GENERAL ELECTRIC CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | FIRST END DIAMETER | 0.7500 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.7035 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.500 INCHES NOMINAL | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 4.1600 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|