|
|
National Stock Number: 3040-01-370-2846
Federal Supply Class: 3040
National Item Identification Number: 013702846
Description: SHAFT,SHOULDERED
Detail: A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
Z440237 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | Z440237 REV G FN 4 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | Z440237 REV G FN 4 | 60587 | FEDERAL EQUIPMENT CO | Z740108 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | Z740108 | 60587 | FEDERAL EQUIPMENT CO |
|
Techincal Specification:
END SIMILARITY | NOT IDENTICAL | FIRST END ANGLE BETWEEN KEYWAYS | 90.0 DEGREES NOMINAL | FIRST END DIAMETER | 3.3760 INCHES MAXIMUM | FIRST END EXTERNAL KEYWAY LENGTH | 4.5630 INCHES MAXIMUM | FIRST END KEYWAY DEPTH | 0.6250 INCHES NOMINAL | FIRST END KEYWAY WIDTH | 0.8750 INCHES MAXIMUM | FIRST END STYLE | TWO FLAT KEYWAYS | LARGEST STEP DIAMETER | 4.0000 INCHES MAXIMUM | MATERIAL | STEEL | PROPRIETARY CHARACTERISTICS | PACS | OVERALL LENGTH | 54.8750 INCHES MAXIMUM | SECOND END DIAMETER | 3.3760 INCHES MAXIMUM | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL | SECOND END ANGLE BETWEEN KEYWAYS | 90.0 DEGREES NOMINAL | SECOND END KEYWAY DEPTH | 0.6250 INCHES NOMINAL | SECOND END KEYWAY WIDTH | 2.8800 INCHES MAXIMUM | SECOND END EXTERNAL KEYWAY LENGTH | 4.3130 INCHES MAXIMUM | SECOND END STYLE | TWO FLAT KEYWAYS | SPECIAL FEATURES | 2 INTERNALLY THREADED HOLES BOTH ENDS,27/64 DRILL 1/2-13 NC TAP,1 INCH DEEP | STEP QUANTITY | 5 |
|
|