2530-01-372-1435 BRAKE SHOE Index 2920-01-372-1437 STARTER,ENGINE,ELECTRICAL

National Stock Number:
3040-01-372-1436

Federal Supply Class:
3040

National Item Identification Number:
013721436

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
534395 ITEM 534395-0171871ALFA LAVAL INC
534395-0171871ALFA LAVAL INC
534395-01F1799ALFA LAVAL


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END GROOVE DIAMETER23.5 MILLIMETERS NOMINAL
FIRST END GROOVE WIDTH3.0 MILLIMETERS NOMINAL
FIRST END DIAMETER25.015 MILLIMETERS MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE85.0 MILLIMETERS NOMINAL
FIRST END STYLECIRCULAR GROOVED
LARGEST STEP DIAMETER24.59 MILLIMETERS MAXIMUM
OVERALL LENGTH223.0 MILLIMETERS NOMINAL
MATERIALSTEEL
SECOND END ANGLE BETWEEN HOLES0.0 DEGREES NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END8.0 MILLIMETERS NOMINAL
SECOND END DIAMETER19.80 MILLIMETERS MAXIMUM
SECOND END DISTANCE BETWEEN HOLE CENTERS11.5 MILLIMETERS NOMINAL
SECOND END STYLETWO CROSS DRILLED HOLES
SECOND END HOLE DIAMETER5.120 MILLIMETERS NOMINAL
SPECIAL FEATURESHAS HOLE THRU 0FF CENTER 6.15 MILLIMETERS
STEP QUANTITY9


Click here to Register for Free 30-day Trial