|
|
|
National Stock Number:
3040-01-459-4822
Federal Supply Class:
3040
National Item Identification Number:
014594822
Description:
CAM,CONTROL
Detail:
AN IRREGULARLY SHAPED ITEM, THAT REVOLVES AROUND AN AXIS, OR SLIDES WITHIN LIMITS, WHICH ACTUATES OTHER PARTS BY CONTACT TO CHANGE THE DIRECTION, SPEED AND/OR TIMING OF A PART IN MOTION. A SHAFT IS NOT INCLUDED. IT USUALLY IS PART OF A CAMSHAFT (AS MODIFIED).
|
Manufacturer Information:
| 2202028-001 | 99200 | EVERAXIS USA, INC. |
|
Techincal Specification:
| CAM OVERALL LENGTH | 1.000 INCHES NOMINAL | | CAM WIDTH | 1.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 | | NOMINAL THICKNESS | 1.500 INCHES | | SPECIAL FEATURES | CAM HAS TWO LOBES, EACH BEGINNING FROM A RADIUS OF 0.875 IN TO A PEAK RADIUS OF 1.000 IN, FROM 297.0 DEG THRU 7.0 DEG FOR A TOTAL OF 70.0 DEG DURATION OF THE FIRST LOBE, AND 144.0 DEG THRU 247.0 DEG FOR A TOTAL OF 103.0 DEG DURATION FOR THE SECOND LOBE; 1.000 IN OPENING THRU CENTER; THREE 0.173 IN DIA HOLES WITH 0.375 IN BY 0.070 IN DEEP COUNTERBORE ARE SPACED EQUAL DISTANCE AROUND SURFACE OF 1.500 IN DIA HUB; THREE MORE HOLES, 0.128 IN DIA BY 0.090 IN DEEP ARE LOCATED ON FACE OF FIRST LOBE, CENTERED ON A 1.250 IN CIRCLE, THE FIRST TWO HOLES ARE POSITIONED AT 45.0 DEG ANGLES TO THE LEFT AND RIGHT OF 0.0 DEG WITH THE THIRD HOLE LOCATED AT 180.0 DEG | | SPECIFIC USE | TURRET AN/MWQ-503 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|