| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL |
| BORE DIAMETER | 1.500 INCHES NOMINAL |
| COMPRESSED LENGTH | 88.375 INCHES NOMINAL |
| EXTENDED LENGTH | 165.375 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 3.500 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 0.625 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 0.625 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 11 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNC ALL WORKING ENDS |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 3.4375 INCHES NOMINAL |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.630 INCHES NOMINAL |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT THREAD CLASS | 2B ALL PORTS |
| PORT THREAD DIAMETER | 1.0625 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 12 ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UN ALL PORTS |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY DIAMETER | 0.4375 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | FOUR HOLE RECTANGULAR |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| OVERALL HEIGHT | 4.250 INCHES NOMINAL |
| OVERALL WIDTH | 2.500 INCHES NOMINAL |
| SPECIAL FEATURES | RECTANGULAR FLANGE MOUNTING ON CAP END; TAPPED MOUNTING ON PISTON HEAD END; 3/8 IN. SQUARE, 1/2 IN. LG. TIP ON PISTON ROD END |