| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | SUPP |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8100 INCHES MINIMUM AND 1.8700 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3600 INCHES NOMINAL |
| OVERALL LENGTH | 3.9400 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.0800 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 430 SHIELD |
| MATERIAL | STEEL COMP 4620 ROD END BODY |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 45.00 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| SHANK THREAD LENGTH | 0.9700 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | DOUBLE EYE BEARING |
| SUPPLEMENTARY FEATURES | FLIGHT SAFETY CRTICAL AIRCRAFT PART |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNJF |