5315-00-003-6126 PIN,STRAIGHT,HEADLESS Index 5360-00-003-6129 SPRING,HELICAL,COMPRESSION

National Stock Number:
3120-00-003-6127

Federal Supply Class:
3120

National Item Identification Number:
000036127

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
114S4702-1177272THE BOEING COMPANY


Techincal Specification:
BODY INSIDE DIAMETER0.5008 INCHES MINIMUM AND 0.5023 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPEROUND CENTER FLANGE LEFT BODY CORNER
CORNER SHAPEROUND CENTER FLANGE RIGHT BODY CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
END TO FLANGE DISTANCE0.1090 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER1.4900 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
FLANGE WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
LEFT END BODY DIAMETER0.6257 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM
OVERALL LENGTH0.5610 INCHES MINIMUM AND 0.5810 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL
RIGHT END BODY DIAMETER0.6257 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM
SPECIAL FEATURESLEFT END FLANGE REDUCED TO 0.800 IN. DIA,LEFT END BODY 0.6900 IN. MIN,0.7100 IN. MAX OD,FLANGE W OF REDUCED AREA,0.035 IN. MIN,0.050 IN. MAX
STYLE DESIGNATORSOLID, EXTERNAL FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH80.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH80.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPS362 FSCM 81205 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us