3120-00-004-8896, BUSHING,SLEEVE

National Stock Number:
3120-00-004-8896

Federal Supply Class:
3120

National Item Identification Number:
000048896

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

L44000-11-6

17564

AIRGLAS, INC.

Techincal Specification:

BODY INSIDE DIAMETER	0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.8740 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM
CORNER SHAPE	ROUND LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER	1.4280 INCHES MINIMUM AND 1.4480 INCHES MAXIMUM
FLANGE WIDTH	0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
INTERIOR FLANGE HOLE DIAMETER	0.1810 INCHES MINIMUM AND 0.2010 INCHES MAXIMUM
INTERIOR FLANGE LEFT END TO CENTERLINE DISTANCE	0.5085 INCHES MINIMUM AND 0.5585 INCHES MAXIMUM
INTERIOR FLANGE WIDTH	0.4130 INCHES MINIMUM AND 0.4730 INCHES MAXIMUM
OVERALL LENGTH	1.3050 INCHES MINIMUM AND 1.3250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-76317-4P FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
SPECIAL FEATURES	ONE SIDE OF FLANGE FLAT 0.575 IN. TO 0.627 IN. FROM CENTERLINE OF BORE TO FLAT EDGE
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END, INTERIOR FLANGE(S) NOT LOCATED AT EITHER END
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial