|
|
|
National Stock Number:
3120-00-007-1506
Federal Supply Class:
3120
National Item Identification Number:
000071506
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| A51H40518-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51H40518-1 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51H40518-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 2.8590 INCHES NOMINAL | | BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 1.5620 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM | | OVERALL LENGTH | 3.6400 INCHES NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP XM-12 ROD END BODY | | MATERIAL | STEEL COMP 440C INNER MEMBER | | MATERIAL | STEEL COMP 631 OR STEEL COMP 630 OR STEEL COMP 410 RACE INSERT | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.5780 INCHES NOMINAL | | SPECIAL FEATURES | KEYWAY IN SHANK 0.156 IN. WIDE BY 0.100 IN. DP AND CHROME ON THREAD AREA | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | PASSIVATE ROD END BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.875 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES DESIGNATOR | UNJF |
|
|