|
|
|
National Stock Number:
3120-01-455-1212
Federal Supply Class:
3120
National Item Identification Number:
014551212
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-465 FED SPEC 1ST MATERIAL RESPONSE AND | | ASTM B 150 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 0.0937 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0600 INCHES MINIMUM AND | | 0.0630 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.5000 INCHES MINIMUM AND | | 0.5050 INCHES MAXIMUM |
|
|