DRIVE TYPE | DIRECT |
ELECTRICAL CONNECTION TYPE | WIRE LEAD |
AIR FLOW RATE | 26.500 CUBIC FEET PER MINUTE NOMINAL |
AMBIENT TEMP AT FULL RATED POWER | -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT |
DISCHARGE DIRECTION | ANGULAR UP |
FEATURES PROVIDED | NONSPARKING AND SAFETY IMPELLER GUARD |
FREQUENCY IN HERTZ | 320.0 AND 495.0 |
HEIGHT | 6.000 INCHES NOMINAL |
INCLOSURE TYPE | FULLY INCLOSED |
LENGTH | 4.501 INCHES NOMINAL |
OUTLET INSIDE DIAMETER | 0.880 INCHES NOMINAL |
OUTLET LOCATION | TOP |
MATERIAL | ALUMINUM OVERALL |
MOUNTING FACILITY TYPE AND QUANTITY | 1 BASE AND 4 UNTHREADED HOLE |
PHASE | THREE |
PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
PRIME MOVER TYPE | ELECTRIC MOTOR |
QUANTITY | 1 |
ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
SPECIAL FEATURES | W/GROUNDED NEUTRAL LEAD,NAMEPLATE SHALL NOT CONTAIN ANY IDENTIFICATION OF U. S. GOVERNMENT OWNERSHIP |
SPEED ADJUSTMENTS | SINGLE SPEED |
STAGE QUANTITY | 1 |
STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 14.3 INCHES OF WATER |
WIDTH | 6.472 INCHES NOMINAL |
STYLE DESIGNATOR | FIXED,ROUND OUTLETS |
SURFACE TREATMENT | CHROMATE AND LACQUER HOUSING OUTSIDE |
TEST DATA DOCUMENT | 36659-644786-7 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC OR 200.0 AC |