| CENTRIFUGAL PUMP DESIGN | MIXED FLOW |
| CENTRIFUGAL PUMP IMPELLER QUANTITY | 1 |
| CENTRIFUGAL PUMP IMPELLER SUCTION TYPE | DOUBLE |
| COOLING METHOD | AIR TO AIR COOLED |
| CURRENT RATING IN AMPS | 4.36 |
| CURRENT TYPE | AC |
| DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.500-11-1/2 NPT |
| DISCHARGE CONNECTION TYPE | THREADED INTERNAL |
| DISCHARGE CONNECTION QUANTITY | 1 |
| FREQUENCY IN HERTZ | 60.0 |
| INCLOSURE TYPE | FULLY INCLOSED |
| INTAKE CONNECTION TYPE | THREADED INTERNAL |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.500-11-1/2 NPT |
| OPERATING SPEED AT RATED CAPACITY | 3450.0 REVOLUTIONS PER MINUTE |
| OPERATION RELATIONSHIP DESIGN | SIMULTANEOUS |
| MAXIMUM DISCHARGE FLOW RATE | 125.0 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | LIQUID |
| PHASE | THREE |
| PRIME MOVER COOLING MEDIUM | AIR |
| PRIME MOVER POWER RATING | 1.500 HORSEPOWER |
| PRIME MOVER QUANTITY | 1 |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| PUMP BASIC MATERIAL | PLASTIC |
| PUMP QUANTITY | 1 |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| SPECIAL FEATURES | PUMP USED FOR ACIDS/BASIS/INORGANIC; MANUAL DRAIN; DRIVE SHAFT 5/8IN.THD; DESIGNED TO MATE WITH 56J MOTOR; IF IMPROPERLY ROTATED DAMAGE WILL INCUR |
| UNPACKAGED UNIT HEIGHT | 7.500 INCHES NOMINAL |
| UNPACKAGED UNIT LENGTH | 15.100 INCHES NOMINAL |
| UNPACKAGED UNIT WIDTH | 8.4380 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 208.0 AND 230.0 AND 460.0 |
| STAGE QUANTITY | 1 |
| SUPPLEMENTARY FEATURES | MATERIAL; NORYL PUMP AND IMPELLER,IMPENATRA ON CERAMIC WITH EPDM TRIM,STAINLESS STEEL HARDWARE; 194.0DEG F CONTINUOUS |
| TOTAL HEAD | 35.000 FEET |