| DRIVE CONNECTION TYPE | RIGID COUPLED |
| DRIVE SHAFT LENGTH | 1.500 INCHES NOMINAL |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CYLINDER QUANTITY | 9 |
| DISCHARGE CONNECTION QUANTITY | 1 |
| DISCHARGE CONNECTION TYPE | RECTANGULAR FLANGE |
| DISCHARGE PRESSURE | 4200.0 POUNDS PER SQUARE INCH GAGE |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION TYPE | RECTANGULAR FLANGE |
| MATERIAL | STEEL PUMP BASIC |
| MAXIMUM DISCHARGE FLOW RATE | 55.41 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | HYDROCARBON FUELS AND OILS |
| OPERATING SPEED AT RATED CAPACITY | 5000.0 REVOLUTIONS PER MINUTE |
| PUMP ROTATION DIRECTION | CLOCKWISE |
| PUMP RECIPROCATING DESIGN | SINGLE ACTING |
| PUMPING ELEMENT TYPE | PISTON |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| RECIPROCATING STROKE TYPE | VARIABLE |
| SPECIAL FEATURES | ELECTRICAL CONTROL; STD PRESSURE LIMITER IN PORTS A AND B; NO AUXILIARY MTG PAD; 0.750IN. DIA TWIN PORTS PER SAE J518C CODE 62; INTREGAL SHORT FILTER INCLUDED; DISPLACEMENT LIMITS BOTH SIDES; SHAFT 15T 16/32 PITCH SPLINE; NO ORIFICE; WELDED PISTONS; CASE DRAIN PORT 0.875-14NPT |
| VOLUME CONTROL TYPE | SERVO PISTON |
| SUPPLEMENTARY FEATURES | DISCHARGING PUMP 350.0PSI; 0.69CU IN./REV; INLET PORT 1.0625-12NPT |
| UNPACKAGED UNIT HEIGHT | 8.820 INCHES NOMINAL |
| UNPACKAGED UNIT LENGTH | 10.160 INCHES NOMINAL |
| UNPACKAGED UNIT WIDTH | 7.7300 INCHES NOMINAL |