| DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL AND THREADED |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | SAE J1926 |
| CONNECTION QUANTITY | 3 |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| CONSTANT DISPLACEMENT PER REVOLUTION | 18.710 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | STEEL HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 1750PSI |
| MOUNTING BOLT CIRCLE DIAMETER | 4.190 INCHES NOMINAL |
| MOUNTING GOVERNMENT STANDARD | SAE A |
| MOUNTING HOLE DIAMETER | 0.535 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 153.0 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 1.130 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SHAFT SCREW THREAD LENGTH | 0.600 INCHES NOMINAL |
| SHAFT THREAD DIRECTION | RIGHT-HAND |
| SHAFT THREAD SIZE | 0.250-20 |
| SPLINE MINOR DIAMETER | 0.850 INCHES NOMINAL |
| SPLINE QUANTITY | 6 |
| SPLINE LENGTH | 0.896 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.998 INCHES NOMINAL |
| SPECIAL FEATURES | SHAFT SPLINE PER SAE J499 6B; USED IN THROAT ASSY OF PAVEMENT REPAIR SYSTEM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.875-14 AND 0.875-4 AND 0.4375-20 |
| TORQUE LOAD RATING | 7470.0 INCH-POUNDS |