| DRIVE SHAFT LENGTH | 1.375 INCHES NOMINAL |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| DRIVE CONNECTION TYPE | RIGID COUPLED |
| CONTROL LOCATION | LEFT SIDE |
| CYLINDER QUANTITY | 9 |
| DISCHARGE CONNECTION QUANTITY | 1 |
| DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.3125-12 UN |
| DISCHARGE CONNECTION TYPE | THREADED INTERNAL |
| DISCHARGE PRESSURE | 2700.0 POUNDS PER SQUARE INCH GAGE |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.875-12 UN |
| INTAKE CONNECTION TYPE | THREADED INTERNAL |
| MAXIMUM DISCHARGE FLOW RATE | 21.0 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | HYDROCARBON FUELS AND OILS |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY | 1800.0 REVOLUTIONS PER MINUTE |
| PUMP RECIPROCATING DESIGN | SINGLE ACTING |
| PUMP ROTATION DIRECTION | COUNTERCLOCKWISE |
| PUMPING ELEMENT TYPE | PISTON |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| RECIPROCATING STROKE TYPE | VARIABLE |
| SPECIAL FEATURES | BUNA-N SEALS; LOAD SENSING COMPENSATOR AND PRESSURE LIMITER WITH A 0.4375-20 UNF-2B PORT;SAE 'B' MOUNTING FLANGE; 0.875-14 UNF-2B DRAIN PORT |
| VOLUME CONTROL TYPE | PRESSURE COMPENSATION |