|
|
|
National Stock Number:
4330-00-006-6221
Federal Supply Class:
4330
National Item Identification Number:
000066221
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 586F-B10AL | 59165 | NORMAN FILTER COMPANY, L.L.C. | | 7515130 | 05228 | PTI TECHNOLOGIES INC. | | 7515130 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 300.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.015 NOMINAL INCHES | | BODY INSIDE DIAMETER | 1.250 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.000 NOMINAL INCHES | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM AND STEEL CORROSION RESISTING FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | 24 GPM NOM FLOW CAPACITY | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
|
|