|
|
|
National Stock Number:
4330-01-369-9187
Federal Supply Class:
4330
National Item Identification Number:
013699187
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1208906 | 02769 | LOCKHEED MARTIN CORPORATION | | 1208906 | 56232 | LOCKHEED MARTIN CORPORATION | | 27620 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 27620 | 18350 | PALL AEROPOWER CORPORATION | | 6190950 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.750 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 0.010 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI TYPE 300 ASSN STD SINGLE MATERIAL RESPONSE FILTERING MEDIUM | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR | | MOUNTING FLANGE BOLT HOLE DIAMETER | 0.180 INCHES NOMINAL | | MOUNTING FLANGE BOLT HOLE QUANTITY | 4 | | MOUNTING FLANGE THICKNESS | 0.050 INCHES NOMINAL | | SPECIAL FEATURES | OBLONG SHAPE; FLNAGE 1.750IN.L X 0.090IN.H X 0.050IN.THK,FILTER 1.000IN.L X 0.380IN.H X 0.950IN. DP; FOUR MTG HOLE 0.180IN.DIA,1.312IN. X 0.625IN. APART; END COVERED; 250.0MICRON WIRE MESH | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) AND MOUNTING FLANGE | | SUPPLEMENTARY FEATURES | FLANGE HAS OVAL OPENING CENTRALLY LOCATED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FILTERING MEDIUM | | SURFACE TREATMENT | PASSIVATE FILTERING MEDIUM |
|
|