|
|
|
National Stock Number:
4330-01-372-2794
Federal Supply Class:
4330
National Item Identification Number:
013722794
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 52942-01 | 15472 | SOLVENTUM PURIFICATION INC. | | 52942-01 | 96169 | ELECTRIC BOAT CORPORATION | | 52944 | 15472 | SOLVENTUM PURIFICATION INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PLASTIC POLYETHYLENE FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | WATER | | SPECIAL FEATURES | SPECIAL ASSEMBLY CONSISTING OF A COPPER NICKEL PERFORATED CORE W/CONNECTOR ON ONE END AND THREADED STUD ON OTHER; FILTER CARTRIDGE HAS SOLID BOTTOM WITH HOLE FOR STUD TO EXTEND; NUT INCLUDED; 250.0MICRON | | TEMP RATING | 85.0 DEG FAHRENHEIT NOMINAL |
|
|