|
|
|
National Stock Number:
4330-01-373-0543
Federal Supply Class:
4330
National Item Identification Number:
013730543
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 19310 | 13520 | DONALDSON COMPANY, INC. | | 2602880-1 | 11243 | COSMODYNE, LLC | | T8-19310-10 | 13520 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DESIGN TYPE | LIMITED | | BODY DIAMETER | 0.312 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.062 INCHES NOMINAL | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 0.09 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | MATERIAL | STEEL COMP 304 CONTAINER/CARTRIDGESTEEL COMP 304 SCREENINGSTEEL COMP 304 SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | GAS | | SPECIAL FEATURES | 1ST END,W/ CONICAL SHAPED CRES SEAL OF 0.682 IN. DIA;2ND END,CAPPED |
|
|