| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.880 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.160 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 13.562 INCHES MINIMUM WORKING AND 13.937 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| TEMP RATING | -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |