| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.325 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.325 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLOW ANGLE | 105.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 40.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| OUTSIDE DIAMETER | 1.250 INCHES NOMINAL |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |