| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL 1ST END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZE 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.188 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 0.422 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| SEAT ANGLE | 8.5 DEGREES 1ST END |
| SEAT ANGLE | 8.5 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE; TETRAFLUOROETHYLENE CHAFE GUARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 24 1ST END |
| THREAD QUANTITY PER INCH | 24 2ND END |
| THREAD SERIES DESIGNATOR | UNJS 1ST END |
| THREAD SERIES DESIGNATOR | UNJS 2ND END |