| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLANGE OUTSIDE DIAMETER | 1.500 INCHES NOMINAL 1ST END |
| FLANGE OUTSIDE DIAMETER | 1.500 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE THICKNESS | 0.275 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.275 INCHES NOMINAL 2ND END |
| FLOW ANGLE | 60.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC AND 1ST LAYER BRAIDED STEEL WIRE |
| OUTSIDE DIAMETER | 1.210 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 26.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |