| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND 1ST LAYER BRAIDED STEEL WIRE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 1.562 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 14.625 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| NONDEFINITIVE SPEC/STD DATA | B TYPE |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-52471 GOVERNMENT SPECIFICATION |
| TEMP RATING | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |