6130-00-017-9339 POWER SUPPLY Index 5930-00-017-9350 SWITCH,PRESSURE

National Stock Number:
4720-00-017-9348

Federal Supply Class:
4720

National Item Identification Number:
000179348

Description:
HOSE ASSEMBLY,NONMETALLIC

Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.


Manufacturer Information:
32-57007-9876301THE BOEING COMPANY
666568-100624EATON AEROQUIP LLC
666568-1R1120SATAIR A/S
MILH2557081349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
N13202216Z0363GH78570SMITHS TUBULAR SYSTEMS-LACONIA, INC.


Techincal Specification:
END CONNECTION DESIGNELBOW 2ND END
END CONNECTION DESIGNSTRAIGHT 1ST END
BURST TEST PRESSURE5000.0 POUNDS PER SQUARE INCH
CONNECTION TYPETHREADED INTERNAL TUBE 1ST END
CONNECTION TYPETHREADED INTERNAL TUBE 2ND END
CONNECTION STYLESWIVEL NUT FLARE 2ND END
CONNECTION STYLESWIVEL NUT FLARE 1ST END
CROSS-SECTIONAL SHAPE STYLEROUND
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY AND INTERNAL SUPPORT
FLOW ANGLE90.0 DEGREES 2ND END
HYDROSTATIC TEST PRESSURE2500.0 POUNDS PER SQUARE INCH
INSIDE DIAMETER0.875 INCHES NOMINAL
INSIDE SURFACE CONDITIONSMOOTH
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND CORROSION RESISTANT
OUTSIDE DIAMETER1.109 INCHES NOMINAL
MAXIMUM OPERATING PRESSURE1250.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH36.350 INCHES NOMINAL WORKING
MEDIA FOR WHICH DESIGNEDETHYLENE GLYCOL AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
MINIMUM INSIDE BENDING RADIUS7.375 INCHES
NOMINAL THREAD SIZE1.312 INCHES 1ST END
NOMINAL THREAD SIZE1.312 INCHES 2ND END
NONDEFINITIVE SPEC/STD DATA2 CLASS
SEAT ANGLE37.0 DEGREES 1ST END
SEAT ANGLE37.0 DEGREES 2ND END
SPECIAL FEATURESBEND RADIUS MAY BE REDUCED TO 4.5 IN. IF WP DOES NOT EXCEED 500 PSI,INTERNAL SUPPORT IS A FLAT HELICALLY WOUND CORROSION RESISTANT STEEL WIRE COIL,NUTS DRILLED FOR LOCKWIRE; ADDITIONAL MEDIA FOR WHICH DESIGNED: OXIDIZERS, SOLVENT
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE
THREAD CLASS3B 1ST END
THREAD CLASS3B 2ND END
THREAD DIRECTIONRIGHT-HAND 1ST END
THREAD DIRECTIONRIGHT-HAND 2ND END
THREAD SERIES DESIGNATORUNJ 1ST END
THREAD SERIES DESIGNATORUNJ 2ND END
THREAD QUANTITY PER INCH12 1ST END
THREAD QUANTITY PER INCH12 2ND END
VACUUM IN TORR50.8


Click here to Register for Free 30-day Trial