| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL 1ST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET ALUMINUM ALLOY 2ND END |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE DICHROMATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET ANODIZE 2ND END |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT DICHROMATE 1ST END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.438 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.875 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 25.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 96906-MS28920 GOVERNMENT STANDARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |