| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 1100.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 110.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MEASURING METHOD AND LENGTH | 13.500 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.600 INCHES NOMINAL |
| INNER CONVEYING TUBE STYLE | ANNULAR OPEN-PITCH CORRUGATED |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| FLARED 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| 0.438 INCHES 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| TEST DATA DOCUMENT | 06071-203-5920-9 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| FSC APPLICATION DATA | POWER PLANT ASSEMBLY,AIRCRAFT |