| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 24.250 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3200.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| FLANGE THICKNESS | 0.300 INCHES NOMINAL 1ST END |
| 0.300 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.704 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| PLAIN SWIVEL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SPLIT 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.273 INCHES NOMINAL 1ST END |
| 0.273 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.386 INCHES NOMINAL 1ST END |
| 2.386 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.386 INCHES NOMINAL 1ST END |
| 2.386 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.800 INCHES NOMINAL 1ST END |
| 1.800 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL 1ST END |
| 1.800 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 192.0 |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |