| END CONNECTION DESIGN | ELBOW 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| BURST TEST PRESSURE | 348.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | BEADED 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | UNTHREADED EXTERNAL HOSE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED POLYAMIDE CORD |
| MAXIMUM OPERATING PRESSURE | 120.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 235.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEASURING METHOD AND LENGTH | 8.385 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.560 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| OUTSIDE DIAMETER | 0.660 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SPECIFICATION/STANDARD DATA | SAE AS1227,TYPE 1-81343 NATIONAL STD/SPEC |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |