END CONNECTION DESIGN | STRAIGHT 1ST END |
END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
BURST TEST PRESSURE | 10500.0 POUNDS PER SQUARE INCH |
CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
CROSS-SECTIONAL SHAPE STYLE | ROUND |
HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
INSIDE DIAMETER | 0.407 INCHES NOMINAL |
INSIDE SURFACE CONDITION | SMOOTH |
LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
OUTSIDE DIAMETER | 0.715 INCHES NOMINAL |
MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
MEASURING METHOD AND LENGTH | 35.250 INCHES NOMINAL OVERALL |
MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
SEAT ANGLE | 12.0 DEGREES 1ST END |
SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
THREAD CLASS | 2B 1ST END |
THREAD DIRECTION | RIGHT-HAND 1ST END |
THREAD SERIES DESIGNATOR | UNF 1ST END |