| END CONNECTION DESIGN | ELBOW 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| BOLT CIRCLE DIAMETER | 0.530 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE DIAMETER | 0.530 INCHES NOMINAL 1ST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.250 INCHES NOMINAL 1ST END |
| CONNECTION STYLE | RAISED 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 1.525 INCHES NOMINAL 1ST END |
| FLANGE STYLE | OVAL 1ST END |
| FLANGE THICKNESS | 1.500 INCHES NOMINAL 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLANGE WIDTH | 3.030 INCHES NOMINAL 1ST END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 2.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND 3RD LAYER BRAIDED WIRE AND 4TH LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| OUTSIDE DIAMETER | 2.680 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 72.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 25.000 INCHES |
| RAISED FACE DIAMETER | 2.120 INCHES NOMINAL 1ST END |
| RAISED FACE HEIGHT | 0.025 INCHES NOMINAL 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R1,FC254 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |