| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEASURING METHOD AND LENGTH | 48.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID AND HYDRAULIC FLUID, WATER BASE AND WATER AND AIR AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF AND ABRASION RESISTANT |
| OUTSIDE DIAMETER | 1.090 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; ENDS FURNISHED CLEAN AND PROTECTED BY CAPS OR PLUGS |
| SPECIFICATION/STANDARD DATA | SAE100R1AT NATIONAL STD/SPEC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD CLASS | 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |