| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NONSKIVE AND REUSABLE END FITTINGS |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER MOLDED RUBBER, SYNTHETIC |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 39.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 100.000 MILLIMETERS |
| NOMINAL THREAD SIZE | 0.4375 INCHES 1ST END |
| OUTSIDE DIAMETER | 15.000 MILLIMETERS NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; USED ON MODEL 11040 WINCH |
| SPECIFICATION/STANDARD DATA | SAE J517, 100R2, TYPE AT, SIZE 4-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |